My Cart:

0 item(s) - £0.00

Float Switch with 12v Pump

Quick Overview

Float Switch with 12v Pump

Availability: In stock

With this product, you earn 110 loyalty point(s).

£110.00
OR

More Views

Details

Effective in Controlling Evaporative Loss. In salt water systems the loss of water from the tank is by evaporation is of fresh water only, which will increase the salinity within the aquarium. This can be automatically replenished using a float switch and controller such as the D-D Multi Function Float Switch System. As the float switch rises and falls it switches the controller on and off, which in turn controls a pump or solenoid to top up the lost water. Top-up System With Low Voltage Pump – RUW12LVP The unit comes complete with a low voltage controller/mains transformer, 2 pin to 3 pin adaptor (UK Only), low voltage pump, float switch device, snail guard and top up hose. Assemble the components as shown on the attached diagram. For evaporative top up operation install the pump in a fresh water reservoir or similar container and connect the clear hose to the pump outlet. The other end of the hose should be inserted into the hole that has been provided on the mounting bracket. Ensure during normal operation that this end of the hose does not terminate beneath the water level, as this will cause water to back siphon once the pump is switched off.